Armor Coat Primed Fascia & Trim-
Trim With Confidence

Conrad Forest Products is now a distributor of Armor Coat™, the new standard in high quality factory primed trim and fascia produced by Belco Forest Products.

All trim and fascia boards are hand selected from quality Inland NW kiln dried white wood to ensure a wane free product. Each board is floodcoated on all sides and back brushed with a machine applied waterborne acrylic top-coating to a wet film build 6 mils thick.

Every piece of Armor Coat precision primed trim and fascia is quality inspected and rack airdried for 24 hours before packaging in standard size units that are paper wrapped with the faces and edges protected.

Standard Unit Sizes Available in 8’ to 20’ lengths
1 x 2 — 560 pcs		2 x 2 — 308 pcs
1 x 3 — 360 pcs	5/4 x 3 — 208 pcs	2 x 3 — 198 pcs
1 x 4 — 260 pcs	5/4 x 4 — 288 pcs	2 x 4 — 143 pcs
1 x 6 — 160 pcs	5/4 x 6 — 128 pcs	2 x 6 — 88 pcs
1 x 8 — 120 pcs	5/4 x 8 — 96 pcs	2 x 8 — 66 pcs
1 x 10 — 100 pcs	5/4 x 10 — 80 pcs	2 x 10 — 55 pcs
1 x 12 — 80 pcs	5/4 x 12 — 64 pcs	2 x 12 — 44 pcs

Armor Coat trim and fascia is available in four varieties of surfacing with either the distinctly rich comb pattern on one face, surfaced four sides or may be special ordered with a re-sawn back or combed on four faces.

The proprietary, uncut ingredient composition of premium titanium dioxides, mildew inhibitors and durable acrylic polymers gives Armor Coat lasting aesthetic value while protecting the substrate against the harshest climatic conditions.

Armor Coat products are backed by a fifteen year limited warranty. Belco Forest Products warrants that the finished Armor Coat product will:

• NOT blister or peel
• NOT erode to expose the substrate
• NOT yellow with age
• NOT chalk or discolor the surface below
• NOT become damaged when dirt is rinsed